iBeLink DM22G Blade, Руководство по устранению неисправностей

Страница: 6 / 20

2. Connect the hardware together.
a.
First, connect the test board to the PI controller. Using the data cable,
connect one end to the connector port on the PI controller board labeled
NO.1 JP4. Connect the other end to the connector port on the back of the
test board labeled J1.
Pic. 2: Connector port NO.1 JP4 on PI Controller
Pic. 3: Connector port J1 on the back of the test board.
b.
Connect power to the testing board with a 12V power cable from the psu.
c.
Now connect the testing board to the hashing board. First, you will need to
remove the panel board to expose the connector ports on the hashing
boards. Then connect the pins X1 on the test board to the connector port X1