8
TRT33A Description
Red LED
• Lights continuously in case of operational error.
• Lights continuously when test is started and test voltage is applied.
4.2
Mains power and connectors
4.3
Setting TRT33A
’s Language
To set TRT33A
‟s language, simultaneously press and hold
START
and
SET
button to enter into the
SETTINGS
menu. Once there, use
UP
or
DOWN
button to select
SET LANGUAGE
menu. Select the
language with the
SET
button and confirm the choice with
ENTER
button.
Pressing
ENTER
to confirm returns you to the
CONFIGURATION
menu.
Pressing
STOP
to cancel returns you to the
SETTINGS
menu.
4.4
Setting TRT33A
’s Time and Date
To set TRT33
A‟s internal time and date, choose
SET TIME AND DATE
by pressing
ENTER
. Use
SET
to
scroll between hours, minutes, seconds, year, month and day. Confirm selection by pressing
ENTER
.
Earth/ground connector.
For protection against parasitic currents or voltages, always connect TRT33A
earth/ground connector to protective ground (PE). Use only the original cable.
For safety reasons, always establish this connection as the first one before
you do any other connections, and also disconnect it as the very last one.
Figure 4-4:
The
SET
LANGUAGE
menu
Figure 4-3:
The
SETTINGS
menu
Figure 4-2:
Mains power
and connectors
Connector for mains power supply
Power switch
I
In this position, TRT33A is connected
to the mains power supply.
0
In this position, TRT33A is separated
From the mains power supply with both
poles.
