34
TRT33A DV-Win Software
All tests are stored in the internal memory of the device. Once the test is finished, the device
automatically switches to next memory location. If you want to set particular location where the test is to
be stored, you can do it by choosing Tools → Options → Settings. The new window will come up, and
you can set particular memory location.
Pressing START will run the test. Once the test is finished, test results are saved in the data table. When
results are obtained, there is a question whether to test the next tap position.
If
the operator chooses “No” option, the test is finished. However, if the operator chooses “Yes” option, a
new message will appear on the display to enter parameters of the next tap changer position.
After entering parameters for the next tap, press OK button and the TRT33A will display the following
message.
Figure 6-5: Measure next
tap message
Figure 6-6: Enter
parameters for next tap
Figure 6-4: Set memory
location
Figure 6-7: Change
tap positions before
running a test
