REV. 8/6/2018 INSTTE-360-3D
5
CAMERA CALIBRATION
(CONT.)
Camera adjustment:
Having a Helper to help aid in adjusting the cameras is highly advisable, but not required. While
adjusting the front cameras, ensure both front doors are fully shut. Also note, having the front
windows down would make it to where adjustments can be made from inside the vehicle.
• Turn the key (or push to start button) to the accessory position to power on the TE-360-3D.
• Press and hold the “Left-Arrow” button on the remote control until the left camera comes on.
• Rotate the left camera so it will show an image from the rear of the vehicle. Clip the camera in.
• Insert the metal “U-shaped” tool provided into the front and rear holes in the bezel of the
camera. (Figure A)
• Pull the tool and camera towards the left rear of the vehicle. The image on the screen should
not show the vehicle. It should be just slightly away from the vehicle. Looking at the camera
it should appear to be aiming between the front and rear tires, away from the vehicle. Keep
adjusting the camera as needed to ensure the best image possible. The goal is to be able to
view traffic in the vehicles blind spot. Once a satisfactory image is provided, continue onto
the right camera. Once the right camera has
been adjusted, ensure that both the left and
right cameras have an equal looking image.
• After the side cameras have been adjusted,
continue on to the front and rear cameras. The
front camera can be activated by pressing the
“Up-Arrow” button on the remote control. The
rear camera can be activated by pressing and
holding the “Down-Arrow” button on the remote
control until the rear camera is displayed.
Continued on the next page
(Figure A)
Button Description
Function
(1)
Mode
Enter settings menu.
In SVM Mode, long press for 2 seconds to enter 4-channel recording.
(2)
Up
In Menu Mode, selects last menu option.
In SVM Mode, short press enters front camera mode.
Press again to get back to SVM mode.
(3)
Right
In SVM Mode, long press to enter right camera mode.
(4)
Down
In Menu Mode, selects next menu option.
In SVM Mode, long press to enter reverse camera mode.
(5)
Left
In SVM Mode, long press to enter left camera mode.
(6)
Confirmation
Confirm selected option.
Remote control functions:
Содержание TE-360-3D
Страница 13: ...REV 8 6 2018 INSTTE 360 3D 13 LAYOUT ...
Страница 14: ...1 800 221 0932 iBEAMUSA com 14 ...
Страница 15: ...REV 8 6 2018 INSTTE 360 3D 15 ...
