iBeam TE-360-3D, Руководство по установке

Страница: 4 / 16

1.800.221.0932
|
iBEAMUSA.com
4
CAMERA CALIBRATION
Applying the calibration tools:
• Park the vehicle in a flat location, away from all obstacles. Apply the tape to the ground as shown. This is a very important
step and the tape must be placed as accurate as possible to create a distortion free, seamless image. Have patience with this
step. (Figure A, B, C)
• Separate the TE-360-3D product box. The product box has an inner and outer shell. Each shell should be placed at one of the (2)
reference points shown. Either B1 and B2 for the back camera, F1 and F2 for the front camera, L1 and L2 for the left camera, or R1 and
R2 for the right camera. Whichever reference points are chosen will dictate the first camera to be calibrated. It would be best if the
boxes were weighted down to avoid the wind from blowing them over. (Figure D)
Continued on the next page
(Figure A)
(Figure C)
(Figure B) (Figure D)