iBeam TE-360-3D, Руководство по установке

Страница: 1 / 16

I N S TA L L AT I O N I N S T R U C T I O N S
iBEAM Vehicle Safety Systems
®
iBEAMUSA.com
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 8/6/18 INSTTE-360-3D
TE-360-3D
CAUTION!
All accessories, switches, climate controls
panels, and especially air bag indicator lights must
be connected before cycling the ignition.
• Includes (4) high resolution 180-degree “fish-eye” cameras
• Exclusive “fish-eye” distortion correction
• Seamless 3D & 360° video merging
• Dynamic & intelligent view angle switching
• Includes calibration tools
• Independent camera calibration • 3D video de-interlacing and noise reduction technology for CVBS
signal decoding
• Digital 1080p recorder supporting up to 32GB USB flash drive or SD card
• Smart power management to preserve battery power
• Automatic recording for up to 28 hours
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell
caps, etc.)
TABLE OF CONTENTS
Introduction............................................................2
Safety tips...............................................................2
Installation ..........................................................2-3
Camera calibration............................................. 4-7
User settings .....................................................8-10
Digital video recording (DVR) .............................. 11
Specifications ........................................................12
Troubleshooting ....................................................12
Layout ....................................................................13
360-Degree 3D SVM Camera System with DVR
INTERFACE COMPONENTS
• TE-360-3D Interface
• TE-360-3D interface harness
• Remote control
• Remote control IR receiver
• Cameras (4) • Camera extension cables (4)
• 22mm hole-saw
• Calibration tape
• Side camera adjustment tool
INTERFACE FEATURES
b