IBC SL SERIES, Руководство пользователя

Страница: 6 / 16

USER’S INFORMATION MANUAL
6
SL SERIES BOILERS
IBC BOILER CONTROLLER
General
This boiler is equipped with the V-10 Touch Screen controller. The controller
simplifies the programing of the boiler while providing greater flexibility. For more
detailed instructions, reference the Touch Screen Boiler Controller Manual.
The controller is equipped to provide:
•
Control of up to 5 pumps – 1 boiler pump + 4 separate load pumps
•
Outdoor Reset control
•
Set Point temperature regulation
•
Domestic Hot Water (DHW)
•
External control via 0-10VDC or 4-20mA signaling
•
Alarm dry contacts
•
Load Combining – simultaneous operation of 2 similar water temperature
loads
•
The control can manage and/or operate in a network of up to 24 IBC VFC or
SL boilers
Some of the new features available in the touch screen control include:
•
Express Setup Menu for simple, quick programing
•
Software updatable in the field with a SD card or a USB stick
•
Setup configuration back-up and cloning using SD card or USB stick
•
Superior warning messages while setting up the control
•
Advanced Error messages with visual display on the Home Screen
•
Internet/LAN connectivity
•
BACnet (with activation)
Control
When the boiler is first energized, the controller will go through a power up
sequence that will take approximately 90 seconds. During this time the controller
is completing a self-diagnostic and loading all previous settings. In the event of
a power interruption the boiler will automatically resume operation when power
is restored with all the previously stored values. The controller provides overall
management of the boiler operations including;
•
Power-up, Self-diagnostics, easy Load parameter adjustments
•
Burner operation, safety management systems, Call for Heat management
and Load Priority
•
Real time boiler data
•
Temperature and throttle operation
•
Maintenance of operational and error service logs
•
2-way communication between other IBC boilers and controls
Operational and historical data may be accessed at any time using the System
Status and Load Profiles sections of the control. Error logs are available in the
Diagnostics section and the controller is capable of recording any or all errors
since original power-up complete with the date and time of the error.
WARNING
No sharp or metallic object
should be used on the touch
screen as this will cause
damage. Use only a Stylus or a
clean finger.