Qscan User’s Guide Version 1.4
Page
PROGRAMMING
EMULA
TIONS
Mag Emulation Control (firmware after 3/29/13)
X024 c d t f b pp ss l yy
c
cstart
0=off
1=on
d
neuron mode
0=off
1=on
t
track emulation
1=track 1
2=track 2 (aba)
f
f2f
0=no
1=yes
b
time between pulses
1 - 5 ms
default=1 (1ms)
pp
pulse time * 50us
1 - 5 *50us
default=02 (100us)
ss
data settle time *10us
1 - 2 *10us
default=02 (20us)
l
lead/trail zero bits
0=yes, 1=no
default=0
zz
right justify zero fill
zz=# digits
00=no justify
This command is the same as the prior command except for the addition
of the l and zz parameters.
Magnetic stripe data is typically preceeded with a number of 0 bits
and appended witha number of 0 bits, for synchronization. The Qscan
default is to send 10 zero bits before and after the data stream. These 0
bits can be turned off with the (“
l
”) parameter.
Some controllers and software systems require fixed length magnetic
stipe data. The (“
zz
”) parameter can be set to right justify the aba data
into a data field (“
zz
”) characters long. The data is zero filled. To turn
off this option, set (“
zz
”) to 00.