38
Version 18.01, 1-Mar-2018
7.7 Wind plate assembly
Beginning with the rear side of the left module row, mount the wind plate on the supports. Screw the left
side of the wind plate to the base rail with screw M8x16. Slide the wind deflector for the next module
sideways on the previously mounted plate and mount onto the next support. Ensure that the lateral tabs
clasp the wind plate. Screw both plates onto the base rail. The gap between screw and end of the base rail
should be at least 3 cm. Repeat process with the other wind plates in the row.
The first and last wind plates in the module row or single wind plates have to be attached with a sheet-
metal screw to the support (Fig.57) .
For AeroFix 10-EW, wind plates
and AeroFix 10S “support top” are only required on the modules if
the first/last row begins/ends with an “support top”
individual modules are omitted with a module field
Fig. 54 Mounted wind plate
Fig. 55 Wind plate assembly starting from the left
Содержание AeroFix 15-S
