IBC control VariMax50, Руководство пользователя, Страница: 5 / 16

SAFETY INSTRUCTIONS
Safety instruction refers to instructions whose specific intent is
to avoid the risk of personal injury and to prevent damage to
equipment.
Danger! Electrical current to electrical components!
NB! Switch off main power before removing the cover.
Never touch electrical components or contacts while main
current is switched on. Risk of electric shock, resulting in serious
injury or death.
Connected terminals contain residual voltage even after the main
current has been switched off.
The following symbols and references will be used in this description.
These instructions are important; they apply to personal and technical safety during
operation.
3
MANUFACTURER'S DECLARATION
Manufacturer IBC control AB
Brännerigatan 5 A, SE-263 37 Höganäs, Sweden
Product
Control unit for rotary heat exchanger
Type designation VariMax50 NG
Directives applicable to
the product
The Manufacturer's Declaration of Conformity for the Product.
All control units are approved according to the requirements of EMC
Directive 2014/30/EU and are tested according to standard
EN 61800-3:2018, emission category C1, immunity; second environment.
All control units comply with the Low Voltage Directive 2014/35/EU,
standard EN 61800-5-1:2007/A1:2017.
All control units are intended for installation in pollution degree 2
environments.
This product also complies with RoHS Directive 2011/65/EU,
including Commission Delegated Directive EU2015/863.
Höganäs 2020-10-01
IBC control AB
Christer Persson
MD