8
IOPS-302 User Manual
2.1.2
M.2 Cards Installation
1. Align the bus connector of the M.2 card with that of the M.2 slot, and insert
the card slantwise.
2. Push the M.2 card downwards as shown in the picture below, and fix it
with a screw.
2.1.3
WiFi / 3G / 4G Antenna Installation
Insert the WiFi / 3G / 4G antenna extension cable through the antenna hole of
the front I/O cover and fasten the antenna as shown below. Then apply
adhesive around the hex nut behind the front I/O cover to prevent the
extension cable from falling off if the cable becomes loose.
1. Fasten the hex nut and the washer. Then
install the antenna.
2. Apply adhesive around here.
Info:
The diameter of the nut is around 6.35 mm
(0.25”-36UNC).
