background image

 

 

 

 

44 

IOPS-302 User Manual 

 


//--------------------------------------------------------------------------- 
void Set_F81846_Reg( unsigned char REG, unsigned char DATA) 

Unlock_F81846();  outportb(F81846_INDEX_PORT, REG);  outportb(F81846_DATA_PORT, 
DATA);  Lock_F81846(); 

//--------------------------------------------------------------------------- 
unsigned char Get_F81846_Reg(unsigned char REG) 

unsigned char Result;  Unlock_F81846(); 
outportb(F81846_INDEX_PORT, REG);  Result = inportb(F81846_DATA_PORT); 
Lock_F81846(); 
return Result; 

//--------------------------------------------------------------------------- 
 
 
 
 
 
//--------------------------------------------------------------------------- 
// 
// THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY 
// KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE 
// IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR 
// PURPOSE. 
// 
//--------------------------------------------------------------------------- 
#ifndef        F81846_H 
#define          F81846_H 

//--------------------------------------------------------------------------- 
#defineF81846_INDEX_PORT  (F81846_BASE) 
#defineF81846_DATA_PORT 

(F8181) 

//--------------------------------------------------------------------------- 
#defineF81846_REG_LD  0x07 
//--------------------------------------------------------------------------- 
#define F81846_UNLOCK  0x87 
#defineF81846_LOCK 

0xAA 

//--------------------------------------------------------------------------- 
unsigned int Init_F81846(void); 
void Set_F81846_LD( unsigned char); 
void Set_F81846_Reg( unsigned char, unsigned char);  unsigned char 
Get_F81846_Reg( unsigned char); 
//--------------------------------------------------------------------------- 
#endif  //      F81846_H 
 
 
 
 

 

Содержание IOPS-302




















































Отзывы: