Ibanez RGD, Инструкция по эксплуатации

Страница: 44 / 217

42
Tight-End bridge / Tight-End R bridge (for 6-string and 7-string)
Tight-End
■
Tight-End
■
Intonation adjustment bolt
Saddle lock bolt
String height adjustment screw
Intonation adjustment bolt
Saddle lock bolt
String height adjustment screw
ADJUSTING THE ACTION
1
Use an Allen wrench (2 mm) to loosen the saddle lock bolts.
2
To adjust the saddle height, use the Allen wrench (2 mm) to turn the
saddle height adjustment screws.
When you ʼ ve fi nished making adjustments, tighten the saddle lock bolts. ※
ADJUSTING THE INTONATION
1
Use an Allen wrench (2 mm) to loosen the saddle lock bolts.
2
Use a Phillips screwdriver to adjust the saddle position by turning the
intonation adjustment bolt.
3
Use an Allen wrench (2 mm) to tighten the saddle lock bolts, and use
a Phillips screwdriver to lightly tighten the intonation adjustment screw
in the clockwise direction. (Tighten lightly, so as not to affect the saddle
position.)
Make sure that the guitar is tuned correctly before you check the intonation. ※
STRING REPLACEMENT
To install a new string, pass it through the string stopper ferrule from the back of the guitar body.
NA12G133.indb 42 NA12G133.indb 42 2012-10-24 11:15:58 2012-10-24 11:15:58