FX EDGE BRIDGE/FX EDGE III-8 BRIDGE
The FX EDGE/FX EDGE III-8 bridge is a locking fixed bridge that was developed based
on the Ibanez Lo-Pro Edge and Edge III Tremolo. The Edge supports the bridge with
three stud bolts: one stud mounted at the rear of the base plate in addition to the two
main studs. These studs help to lock the bridge in place and efficiently transmit string
vibration into the body.
Adjusting the action
Adjust the height of the whole bridge by turning all of the three stud bolts. Note that
it is not possible to adjust the height of individual strings. After adjusting the height of
the main studs (Fig. 1 A), the rear stud (Fig. 1 B) must be compensated by using the
provided 3 mm Allen key to keep the angle of the bridge in the correct alignment. (The
bridge should sit parallel to the body (Fig. 2).)
Caution
With a half turn of the main stud, the action changes approximately 0.3 to
0.5 mm. Carry out action adjustments by repeatedly turning the stud bolts in
smaller increments.
The action may change after the final adjustment of the rear stud. It is recom-
mended that you check the final action after the rear stud is adjusted.
A
B
FX-EDGE
Ⅲ
-8
FX-EDGE
B
A
Fig. 1
Fig. 2
Содержание AEL Series AEL10E
Страница 1: ......