GIBRALTAR 08 BRIDGE / QUICK CHANGE
08 TAILPIECE
Adjusting the action
Adjust the height of the whole bridge by loosening the locking nuts (Fig. 1) on the right
and left ends of the bridge and turning the stud bolts (Fig. 2) with a slot head screwdriver.
Note that it is not possible to adjust the height of individual strings. After completing the
adjustment, tighten the locking nuts.
Adjusting the intonation
To adjust the saddle position, turn the intonation adjustment screws (Fig. 3) on the sad-
dle subject to adjustment with a slot head screwdriver. Tune the guitar and check the
intonation. Repeat these adjustments until the required intonation is reached.
Replacing the strings
Insert the string into the slot (Fig. 4 A) of the tailpiece, and hook the ball-end onto the
rear section of the tailpiece.
Adjusting the height of the tailpiece
To adjust the height of the tailpiece, after loosening the locking nuts (Fig. 4 B) on the
right and left ends of the tailpiece, turn the adjustment bolts (Fig. 5) with a slot head
screwdriver.
Fig. 1
Fig. 2
Fig. 3
A
B
Fig. 4
Fig. 5
Содержание AEL Series AEL10E
Страница 1: ......