64
5.
Right-click on
Wireless Card bus Adapter
or
your specific network adapter
.
6.
Select
Properties
to ensure that all drivers are installed properly.
7.
Look under
Device Status
to see if the device is working properly.
8.
Click “
OK”
.
2
What can I do if my Ethernet connection does not work properly?
A.
Make sure the RJ45 cable connects with the router.
B.
Ensure that the setting on your Network Interface Card adapter is “Enabled”.
C.
If settings are correct, ensure that you are not
using a crossover Ethernet cable, not
all Network Interface Cards are MDI/MDIX compatible, and use a patch cable is
recommended.
D.
If the connection still doesn’t work properly, then you can reset it to default.
3
Something wrong with the wireless connection?
A. Can’t setup a wireless connection?
I.
Ensure that the SSID and the encryption settings are exactly the same to the
Clients.
II.
Move the 300M MIMO Triple Smart Router and the wireless client into the
same room, and then test the wireless connection.
III.
Disable all security settings such as
WEP
, and
MAC Address Control
.
IV. Turn off the 300 MIMO ADSL2+ Broadband Router and the client, then restart
it and then turn on the client again.
V.
Ensure that the LEDs are indicating normally. If not, make sure that the power
and Ethernet cables are firmly connected.
VI. Ensure that the IP Address, subnet mask, gateway and DNS settings are
correctly entered for the network.
VII. If you are using other wireless device, home security systems or ceiling fans,
lights in your home, your wireless connection may degrade dramatically. Keep
your product away from electrical devices that generate RF noise such as
microwaves, monitors, electric motors…
