28
C. PPP over Ethernet
1.
IPv6 Dual-stack:
You can enable / disable the function of IPv4/IPv6 stack.
2.
PPPoE Account
and
Password:
The account and password your ISP
assigned to you. For security, this field appears blank. If you don't want to
change the password, leave it blank.
3.
Connection Control:
you can choose Connect-on-demand, Auto Reconnect
(always-on) and Manually.
4.
Service name and assigned IP address
.
5.
Primary DNS/ Secondary DNS:
input the Primary/Secondary DNS if
necessary.
6.
MTU:
Most ISP offers MTU value to users. The default MTU value is 0 (auto)
7.
NAT disable:
If you enable this option, it will act with a non-NAT function.
8.
Multicast:
you may enable as auto mode or select by IGMP v1, IGMP v2, and
IGMP v3.
9.
IGMP Snooping:
enable or disable IGMP snooping function.
10.
VLAN TAG:
you may input the value of VLAN Tag by your ISP setting.
(Range : 1~4094)
