26
9.
Data Encapsulation:
Vc-MUX and LLC, these two options depend on your
ISP setting. (LLC is default as configured)
10.
VPI and VCI, Schedule Type:
these values depend on your ISP setting.
11.
Schedule type
: UBR / CBR / VBR / GFR, depend on your ISP setting.
12.
Multicast:
you may enable as auto mode or select by IGMP v1, IGMP v2, and
IGMP v3.
13.
IGMP Snooping:
enable or disable IGMP snooping function.
14.
VLAN TAG:
you may input the value of VLAN Tag by your ISP setting.
(Range : 1~4094)
Ethernet WAN
A. Dynamic IP Address
1.
Enable WWAN for Auto-Failover
:
With this function Enabled, Ethernet WAN
connection is broken, the device will automatically activate the Dual WAN connection
and keep you connected to internet with the alternative Dual WAN (2G/3G ISP service).
Meanwhile, if the device detected Ethernet WAN connection is recovered, your router
will switched to use the Ethernet WAN Internet connection service.
2.
Host Name
: Optional, required by some ISPs, Default : iB-WRT300N.
3.
ISP registered MAC Address:
Enter MAC address of your ISP. (Optional)
4.
Connection Control
: Connect-on-demand in the device will link up with ISP when
the clients send outgoing packets. Auto Reconnect (Always-on) in the device will link
