Manual
ibaRackline
26
Issue 1.16
8.3
Cleaning and replacing the fan
Depending on the installation site it is necessary to clean or replace the fan. First, remove
the grid as described above and proceed as follows:
1.
Loosen all 4 fastening screws which are used to fix the fan.
2.
Remove the fan forwards.
3.
Unplug the cable connection
4.
Clean the fan or insert a new one.
5.
Connect the cables of the fan and the cables of the computer with the cable con-
nector.
6.
Insert the fan again.
7.
Fasten the fan with the 4 srews at the housing.
8.4
Replacing the power supply unit
If it is necessary to exchange the power supply unit, observe the following instructions
and safety instructions.
Electric Shock!
Only qualified professionals are allowed to replace a power supply unit during operation!
Electrostatic discharge!
Touch the components only in electrostatically discharged state!
