ibaRackline
Manual
Issue 1.16
25
8
Maintenance work
8.1
Basic procedure
If you carry out any maintenance work at the device, always proceed in the following
way:
1.
Remove all mobile data carriers (DVD, memory cards and so on).
2.
Shut down the device.
3.
Switch off the device.
4.
Unplug the mains cable from the socket.
5.
Remove the housing cover.
6.
Carry out the maintenance work.
7.
Attach the housing cover again.
8.
Put the device into operation again.
8.2
Cleaning or replacing the dust filter
Depending on the installation site it is necessary to clean or replace the dust filter in both
grids. The dust filter should be replaced every 6 months.
1.
Loosen the fastening screw which is used to fix the grid and open the grid.
2.
Take the dust filter out of the grid.
3.
Clean the dust filter or insert a new one (iba filter mat: Order number 43.000360).
4.
Close the grid again and fasten the screw.
