ibaRackline
Manual
Issue 1.16
29
3.
Loosen both screws inside, which are used to fix the power supply unit inside the
housing.
4.
Loosen 2 screws each on the left and the right side, which are used to fix the bar
(1) and remove the bar.
5.
Disconnect all cable connections to the mainboard and the drives.
6.
Remove the power supply unit (2) from the housing, by pulling it backwards and lifting
it out.
7.
Remove the mounting angles on the left and right side from the power supply unit
by loosening 2 screws from the inner side.
