Manual
ibaRackline-PC CAM/HD
16
Issue 1.1
6
Installation, connection and first switching on
6.1
Safety instructions
Electric Shock!
Never use the device with a damaged mains cable!
Connect the device to one supply voltage only according to specifications on the built-
in power supply unit!
Always use a socket equipped with earthing contact! Use a terminal strip with overvolt-
age protection or an uninterruptible power supply (UPS)!
Connect the device only to earthed power networks (TN-networks according to
VDE 0100 Part 300 or IEC 60364-3)!
The operation via ungrounded networks or networks (IT networks) earthed via imped-
ance is not permitted!
Never put a damaged device into operation!
6.2
lnstallation
Note
If you install the device into a 19" cabinet with rotating rack, consider the depth of the
device. Observe the minimum bending radii of the cables.
1.
Place the device from the front onto the 19" rack line.
2.
Fasten the device using 4 screws at the 19" rack line.
3.
Plug in the mains cable of the device into a socket.
6.3
Connection and first switching on
Note
Before switching on the device for the first time check if the power supply is properly
connected and the connecting cable (fiber optic and copper data cable) are plugged in.
The device is delivered pre-installed and configured. Refer to the relevant manuals or
online help for the settings of the operating system and the iba software.
1.
Connect all cables.
2.
Switch on the device using the mains switch.
3.
Boot the device. Press the power button.
The computer is booted automatically with Windows.
4.
Finally, start all iba software applications.
