IBA FOB-SD, Руководство пользователя

Страница: 9 / 27

ibaFOB-SD Manual
Issue 1.3 9
5 Introduction
5.1 Application
The ibaFOB-SD card couples the iba Process Data Acquisition system ibaPDA or the
Soft PLC ibaLogic with the Siemens control system SIMADYN-D. Therefore, the iba-
FOB-SD must be connected to one of the free fiber optic links of the SIMADYN-D
CS12/13 or 14.
By means of the Siemens interface board CP53M0 the ibaFOB-TDC card can be con-
nected with the SIMATIC TDC control system without the need for a GDM.
This new PCI card replaces the “old” ISA card ibaFOB-x/2 SD.
All component parameters are 100% controlled by software. No wiring or jumpering is
necessary for that board.
5.2 Characteristics
The card has the following characteristics:

Fully compliant PCI V2.2 board

1 bi-directional fiber optic channel with 96 Mbit/s

256 kB of PCI dual port-RAM for PC access

Firmware upgrade in the PC via PCI bus without de-installing the card

3 LEDs for each channel indicating CPU life counter (green), optical transmission
status (orange) and processor error (red)

7-segment display for board-ID, indication of sync master board and external or
internal synchronization

No Jumpers or DIL switches, all parameters are software controlled (the switch
on top of the board is for iba internal use only)

Dynamic reassigning of interrupt sources and interrupt generation (board and
driver synchronization)

Absolutely noise free acquisition of process data

100% functional compatibility with predecessor board ibaFOB-x/2 SD (ISA) guar-
anteed

Enhanced SIMADYN-D system diagnostics

Up to 4 ibaFOB-SD cards per PC

Plug and Play installation
5.3 Operational modes
The following operational modes are supported by ibaFOB-SD:

ibaPDA-lite-SD-TDC:
4 cards with max. 512 analog plus 512 binary values are supported by this soft-
ware; supports the ibaPDA-Technostring (a non-structured ASCII string) via the
SD link.