ibaFOB-SD Manual
6
Mounting and dismounting
6.1
Safety information
The following safety advices apply when handling the card:
Electric shock!
Switch off the PC and disconnect it from the mains power supply before opening!
Electrostatic discharge!
This board contains components which can be destroyed by electrostatic discharge.
Before touching the board makes sure that your body is electrically discharged or
works in a designated ESD protected area!
The standards for handling electrostatic sensitive devices (ESD) must be followed.
6.2
Mounting
Note
In order to take advantage of the plug and play function be sure that ibaPDA-V6, re-
spectively ibaLogic-V4 has been installed before inserting the card. Otherwise, Win-
dows will not recognize the card.
1.
Shut down the PC.
2.
Switch off the power supply of the PC.
3.
Unplug the mains power line.
4.
Open the PC so you can reach the PCI slots.
5.
Take the card carefully out of the package.
6.
Grab the card at the front plate and the rear upper corner. Do not touch the con-
tacts.
7.
Plug in the card carefully into a free PCI slot.
8.
Fix the card to the housing of the PC. If more than one iba PCI card is installed
connect all cards with one another by the flat ribbon cable (sync cable).
9.
Close the PC.
10.
Plug in the power line.
11.
Switch on the power supply of the PC.
12.
Start the PC.
Issue 1.3
15
