Modello - Modèle - Model
Modell - Modelo - Model
ARMADIO PROFESSIONALE - SERVICE CABINET - ARMOIRE PROFESSIONNELLE
BERUFS KÜHLSCHRANK - ARMARIO PROFESIONAL - PROFESSIONELE KOELKAST
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante - Fabrikant
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
PAGE
13/64
N° DOC
UM000348
3. TRANSPORTATION
The display cabinet is contained in a specially crated package that enables transportation by the
use of fork-lift trucks. For each subsequent handling of the cabinet, the use of the wooden platform
is recommended. The unit is shipped anchored onto a wooden base and protected by corner posts,
cardboard top and nylon wrapping. It must only be handled using a fork lift truck with adequate power
to the load. Positioning the appliance horizontally or on its side or upside down is to be strictly avoided.
Handling is reserved to the authorised after-sales service.
The equipment MUST be kept vertical.
During transports operation put the wood part under the
door in order to avoid possible door-frame foldings.
4. STORAGE AND DISMANTLING
WARNING! Use protective gloves during unpacking and installation operations.
During unloading and movement operations, avoid tilting the machine and avoid sudden manoeuvres.
The unit is shipped anchored onto a wooden base and protected by corner posts, cardboard top and nylon wrapping. Keep all
packaging away from children. For each subsequent handling of the cabinet, the use of the wooden platform is recommended.
Carefully remove the packaging, taking care not to damage the components and not to throw away those that will be needed
for assembly.Keep all packaging away from children.
ATTENTION! After unpacking, check that the appliance has not suffered damage during
transportation.
5. LOADING
Warning! It’s absolutely forbidden to place the product in the tanks over the max load level.
It is fundamental not to exceed the load limits indicated to avoid altering correct air circulation and thereby avoid a higher
product temperature.
Attention!
It is strictly necessary to comply with
the max loads indicated (Kg) for each
shelf to avoid deformation or breakage.
MAX WEIGHT ON ANY SHELF
AB 400 P
26
AB 400 N
21
AB 500 P
50
AB 500 N
36
AB 600 P
55
AB 600 N
38
AB 700 P
54
AB 700 N
54
6. CHOICE OF THE INSTALLATION SITE
In selecting the place of installation, ensure that the following instructions are observed, this being vital for proper and troublefree
working of the cabinet:
• Do not install the cabinet in the vicinity of heating radiators or other heat sources.
• Do not install the cabint where it is exposed to direct sun light (e.g. through windows).
• Do not expose the refrigeration unit to air currents from fans, open doors, conditioning units.
• Keep the air intake and outlet area around the plinth area of the cabinet clear of cartons and other obstacles.
• It is necessary taht the condensing unit obtains a good circulation of air around it; also the area around the condensing
unit should not be obstructed by boxes or other objects; keep a distance from the wall of
10 cm
. at least.
Air-Condition
