IAI TB-02 Скачать руководство пользователя страница 322

Страница: 322 / 420

5. Operation of MEC Related Controllers

310

5.14 Maintenance, Data Backup

Data is transferred between the Secure Digital memory card in the touch panel teaching pendant

and the controller.

(Note) Type of Stored Data

This includes the position data, parameters and alarm list.

It is not applicable to the backup data storable in the MEC PC software.

Please note that MEC PC Software cannot deal with individual position data and

parameters.

(Note) Extensions of the Stored Data

• The file extensions for AMEC Controllers to be stored in the Secure Digital card are ptam for

the position data and pram for the parameters. The position data extension for PMEC

controllers is ptpm and the parameters extension is prpm.

• The alarm list can only have the backup. It cannot be restored. Data is in a CSV file.

(Note) Directories of the Stored Data

The folders to store the backup data of the controller and the folder to read the data from

when restoring the data to the controller are as listed below. The directories to store the files

cannot be changed. The files existing in other directories other than the specified folders

cannot be listed up in the file name list in the file selection at the initial setting or when

restoring.

If the folder does not exist, it is automatically created.

• Position Data

：

\TB_CON\Position\File Name

• Parameter

：

\TB_CON\Parameter\File Name

• Alarm List

：

\TB_CON\Alarmlist\File Name

(Note) Files with Chinese names are not supported.

Содержание TB-02





































































































































































































































































































































































































































Результаты поиска

Содержание TB-02

Отзывы:

Бренды по названию

Популярные бренды

IAI TB-02, Инструкция по эксплуатации

Результаты поиска

Содержание TB-02

Отзывы:

Бренды по названию

Популярные бренды