IAI TB-02 Скачать руководство пользователя страница 3

Страница: 3 / 420

Please Read Before Use

Thank you for purchasing our product.

This Instruction Manual explains the handling methods, structure and maintenance of this product,

among others, providing the information you need to know to use the product safely.

Before using the product, be sure to read this manual and fully understand the contents explained herein

to ensure safe use of the product.

The DVD enclosed with the product contains the Instruction Manual for our products.

When using the product, refer to the necessary portions of the applicable instruction manual by printing

them out or displaying them on a PC.

After reading the Instruction Manual, keep it in a convenient place so that whoever is handling this

product can reference it quickly when necessary.

[Important]



This Instruction Manual is original.



The product cannot be operated in any way unless expressly specified in this Instruction

Manual. IAI shall assume no responsibility for the outcome of any operation not specified

herein.



Information contained in this Instruction Manual is subject to change without notice for the

purpose of product improvement.



If you have any question or comment regarding the content of this manual, please contact

the IAI sales office near you.



Using or copying all or part of this Instruction Manual without permission is prohibited.



The company names, names of products and trademarks of each company shown in the

sentences are registered trademarks.

Содержание TB-02





































































































































































































































































































































































































































Результаты поиска

Содержание TB-02

Отзывы:

Бренды по названию

Популярные бренды

IAI TB-02, Инструкция по эксплуатации

Результаты поиска

Содержание TB-02

Отзывы:

Бренды по названию

Популярные бренды