4. Maintenance and Inspection
37
4.2 External Visual Inspection
An external visual inspection should check the following things.
Main Unit
Loose actuator mounting bolts, other loose items
Cables
Scratches, proper connections
Stainless steel sheet
Scratches
Overall
Irregular noise, vibration
• The life of the stainless steel sheet should be 5,000km of driving distance as a reference.
However, replace the stainless steel sheet when it is necessary depending on the condition of use.
The replacement work of the sheet is to be conducted basically in our factory or at the site by a
service engineer that we send.
4.3 Cleaning
• Clean exterior surfaces as necessary.
• Use a soft cloth to wipe away dirt and buildup.
• Do not blow too hard with compressed air as it may cause dust to get in through the gaps.
• Do not use oil–based solvents as they can harm lacquered and painted surfaces.
• To remove severe buildup, wipe gently with a soft cloth soaked in a neutral detergent or alcohol.
4.4 Internal Inspections
Turn off the power, remove the side cover and inspect inside visually.
When inspecting the interior, check the following items.
Guide Section Lubrication, buildup
Long Belt
Refer to 4.4.2 Belt for inspection items.
