manualshive.com logo in svg

IAI RCM-T, Руководство по эксплуатации

Поделиться
Скачать
IAI RCM-T Скачать руководство пользователя страница 84

 

76 

 

Controller Error List 

 

 

 

Alarm detail code 
(In the case of 0, ----will be displayed.)

 

 

 
 
 
 
 
 
 

Display of PCON, ACON, SCON and ERC2 

Display of RCP, RCS, E-Con, RCP2 and ERC 

 

Ten key 

 

Ten key

 

0 

Alarm-level error detected last

 

0 

Alarm-level error detected last

 

1 

Alarm-level error detected 1-time before

 

1 

Alarm-level error detected 1-time before

 

2 

Alarm-level error detected 2-times before

 

2 

Alarm-level error detected 2-times before

 

3 

Alarm-level error detected 3-times before

 

3 

Alarm-level error detected 3-times before

 

4 

Alarm-level error detected 4-times before

 

4 

Alarm-level error detected 4-times before

 

5 

Alarm-level error detected 5-times before

 

5 

Alarm-level error detected 5-times before

 

6 

Alarm-level error detected 6-times before

 

6 

Alarm-level error detected 6-times before

 

7 

Alarm-level error detected 7-times before

 

7 

Alarm-level error detected 7-times before

 

8 

Alarm-level error detected 8-times before

 

8 

Warning-level error detected last

 

9 

Alarm-level error detected 9-times before

 

 

 

 0 

Alarm-level error detected 10-times before

 

 

 1 

Alarm-level error detected 11-times before

 

 

 2 

Alarm-level error detected 12-times before

 

 

 3 

Alarm-level error detected 13-times before

 

 

 4 

Alarm-level error detected 14-times before

 

 

 5 

Alarm-level error detected 15-times before

 

 

 
If you press the 

  key, the screen will return to the Teaching Pendant error list screen. 

If you press any of the ten key “0” to “8,” an error
which occurred after a controller’s power-on will be
displayed. For the numbers of 10 or larger, press

  and any of the ten key “0” to “5.” 

Note: The function of displaying errors after a
controller’s power-on is supported by the Teaching
Pendant FLASH Ver. 1.61 or later. 
 
In the case of PCON, ACON, SCON, or ERC2, the
alarm list contents will be maintained even after the
power is turned OFF. 
 
The previous eight alarm-level errors including the
last (latest) error and one last-detected error of the
warning level will be displayed. 
The relationship between the ten key number and
the displayed error is as shown below. The error
display can also be changed by the arrow key. 

7 0 0 4 

B a n k   3 1   e r r o r   ( P o i n t ) 
E r r   N o   0 B 1         - - - -

X X

Содержание RCM-T











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды