IAI RCM-T, Руководство по эксплуатации

Страница: 79 / 106

71
The Jog screen will be displayed.
To select, Servo, Home, Jog, and Increment, use the
key or key to move the cursor.
(1) Current position: Indicates the current position. If you press the [X] key, the display will change
to the pulse display.
(2) Servo: If you press the Return key, the serve ON/OFF status will be reversed.
(3) Home: If you press the Return key, home return operation will be executed.
(4) Jog: Can perform jogging. Select Jog and press the Return key.
The cursor will move to Vel 1. Select Vel with the [X] key.
1: 1 mm/sec, 2: 10 mm/sec, 3: 30 mm/sec, 4: 50 mm/sec, 5: 100 mm/sec
However, only the maximum speed will be gained if the maximum speed is
slower than the specified speed.
If you press the arrow key (
), the cursor will move.
If you press the key, the cursor will move in the positive direction of the
display coordinates. If you press the key, the cursor will move in the
negative direction of the display coordinates.
(5) Increment: Can perform increment movement. Select Increment and press the Return key.
The cursor will move to the distance of 0.03 mm. Select Dist (0.03 mm, 0.1 m,
0.5 mm). If you press the arrow key (
), the cursor will move.
If you press the key, the cursor will move in the positive direction of the
display coordinates. If you press the key, the cursor will move in the
negative direction of the display coordinates.
If you continue pressing the arrow key (
) for 2 sec. or more, jog movement
can be performed.
The speed will increase every one sec. from 1 to 10, 30, 50, and 100 mm/sec.
However, only the maximum speed will be gained if the maximum speed is
slower than the specified speed.
(1) Current position
(3) Home
(2) Servo ON/OFF
(4) Jog
(5) Increment
S e r v o