IAI IF, Руководство по эксплуатации

Страница: 15 / 48

I
NTELLIGENT ACTUATOR
5.2 Handling of the Assembled Unit
5
When the actuator is carried with all the axes installed, follow the instructions below.
5.2.1 Shipping of the Assembled Unit from Our Company
5.2.2 Handling of the Assembled Unit with Peripheral Equipment
For the specified machine, after it is assembled in our company, the delivery inspection is performed and the machine is
packed with the outer frame nailed onto the skid. The carton is fixed so that the slider does not move unexpectedly during
the transportation. For the combined actuator unit, it is fixed so that the pointed end does not swing greatly due to the
external vibration.
When the machine is transported after it is assembled in and shipped from our company, or assembled in your company,
handle it following the instructions below.
• There is no special accommodation for this carton to endure the impact due to drop or bump. Therefore, take the greatest
care in handling it. Because the outer frame can not stand the load on it, do not put any heavy thing on it.
• When it is suspended using a rope, support it from the reinforced frame under the skid. When it is lifted using the forklift, lift
it also from the skid bottom.
• When it is lowered, handle it so that no impact is given or it does not bounce.
• Fix the slider section, so that the slider does not move unexpectedly.
• When the actuator end is projected, fix it appropriately so that the projected end does not swing greatly due to the external
vibration.
• In the transportation of this machine without fixing the pointed end, do not give any impact of 0.3G or more.
• When the actuator and its peripheral equipment are suspended using a rope, arrange the rope so that it does not touch the
machine body directly.
• Arrange it so that the load of the rope is given directly to the base body through the appropriate buffer material.
• Support the front end of the Y-axis and keep its stable horizontal setup. At that time, take care not to give any load onto the
belt cover.
• Take care not to give any load onto the bracket, the cover or connector box on each section in the main machine. Also,
make sure that the cable is not caught or deformed forcibly.
After it is unpacked, handle it following the instructions below.