9
D4 Single Sided Workstation Heavy Duty Frame
ITEM DESCRIPTION
QTY
4
D4 S/S Worksurface
1
6
D4 S/S Heavy Duty Frame
1
HARDWARE KIT HWR214
ITEM DESCRIPTION
QTY
B
Washer 1/4 Flat Black
16
D
Bolt 1/4-20 Hex Head Black
16
Note: If this order includes PDS-II please see page 18 before installing work surface.
Step 10:
Lay the worksurface upside down on a clean padded surface. Position the heavy-duty frame over
the threaded ins
erts in the worksurface. Attach the frame using Item #’s D and B. Tighten
hardware only when all bolts are started by hand. Do not over tighten. If this is an ESD
worksurface attach the ESD Coupler Nut found in hardware kit HWR014. See page 85 for
installation caution notes.
Note:
If your order includes 3”, 6” or 12” single drawers units you can assemble the drawer cases onto
the worksurface hat sections at this time. This makes the attachment of the drawer cases easier
but also makes the worksurfaces heavier and therefore more difficult to turn over and place into
position. Caution must be taken during this process to insure that assemblers are not injured
during and that the worksurfaces and the surrounding areas are not damaged. If you choose to
assembly the drawer cases to the worksurface at this time IAC Industries recommends that all
assemblers are wearing proper safety equipment. Refer to page 36 for drawer assembly
instructions.
