1.3.2
Location of the device’s main parts is shown in Figure 2.
Figure 2 – Components assembly
The housing is constructed of high impact ABS plastic.
In housing are installed:
1 – Power switch (On/Off)
2 –
LEDs
3 – Lens with red filter
4 – Power jack for battery charger
5 – Battery charge indicator
1.4
Structure and functioning
1.4.1 Operating principle is based on the effect of the reverse flare. Device emits light and receives the reflected
emission (including the reflected flares from spy cameras). Since the brightness of the reflected beam from the
camera lens is in several times higher than the reflections from other objects, then to determine the location of a
camera is quite simple.
1.4.2 The device runs under command of microcontroller with embedded software.
1.4.3 The device is powered by a battery. Charger plug in is made through a power jack (item 4, see Figure 2).
Polarity of power jack is shown in Figure 3.
Figure 3 – Polarity of jack for battery charger.
Note!
The battery is designed for lifetime work of the device and does not require any replacement during
operation.
