- The locations where eavesdropping devices and hidden cameras are usually placed are: cavities and chinks
in plinths and walls, behind radiators, remote places on wardrobes and curtain-rods, cavities of suspended ceiling,
ventilating shafts, furniture elements, household equipment, flowers, car dashboards and seats, etc.
- The device automatically adjusts the sensitivity level and starts displaying the actual value of signal
strength on the indicating scale when you turn it on.
- If a RF bug is detected, the Product displays it on the indicating scale and alarms by sound. The closer
detector to the RF bug is, the higher is the level on the indicating scale.
- While searching, search for analog and digital bugs (operate in two different modes).
- The device is switched to the “security” mode when there are no unknown emissions in a room and the
implicit control of the situation is needed, for example during negotiations. When switched into “security” mode,
the device assesses surrounding radio environment. If some new source of signal appears, for example a cell
phone turns on to transmit the information or a “bug” activates, the device will alarm you about this.
- ‘sound feedback’ is used for searching for hidden RF bugs, working in the analog mode.
While searching in ‘sound feedback’ mode, a wireless bug receives the sound produced by detector and
transmits it on the air; the signal detects by the Product next, that leads to acoustic amplification of the sound
produced by the Product. As a result, the cycle is closed and you hear the indicative whizz.
The ‘sound feedback’ mode helps to detect the source of signal exactly, and at the same time it cuts the
searching time.
5. Сontents of delivery
The table below gives information on components of the product and the delivery set.
Table 1
№
Description
Qua
ntity
Note
1
Digital bug detector «BugHunter™
Professional BH-02 Rapid»
1
2
AAA type battery
2
3
Headphones
1
4
Shipping box
1
5
User manual INTK.411153.009 RE
1
6. Maintenance
The maintenance includes changing the batteries if it’s out of service and keeping the surface clean by
removing the dirt if needed.
7. Package and transportation
Every Product delivery set (see Table 1) is packaged in an individual corrugated fiberboard box. The
moving of contents of the box is not allowed. The packaged products are put into cargo
corrugated containers
according to the GOST 22637.
Packaged products can be transported by train or by trucks in covered trucks or containers or by
air
transport in pressurized modules.
While transporting the packaged products should be protected from the direct impact of
atmospheric
condensation and insolation.
Terms of transportation:
- environment temperature from -50 to 50
С;
- - relative humidity below 95 % at 25
С;
- - atmospheric pressure from 84 to 107 kPa (from 630 to 800 millimeters of mercury)
- shock acceleration peak values below 147 m/s
2
(15 g) with duration 10-15 ms.
The requirements specified on the package warning labels must be strictly observed during loading and
transportation.
