1.5. Annexxus Installation/Setup Details
Before installing Annexxus module at the client's location, the technician
must
complete the following:
• Assign a unique IP address to each Annexxus module.
Unless this step is completed prior to installation, the customer will be unable to detect Annexxus module on their
LAN/WAN network.
• Synchronize Annexxus clock to the time zone, where the module is being installed.
Unless this step is completed, the time stamp on video recordings and log records (if available) will not match the
current time.
1.5.1. Changing IP Address
Each Annexxus device comes with pre-assigned IP scheme: IP Address
192.0.0.64
; Subnet Mask:
255.255.255.0
Important
Before installing the Annexxus unit, techni-
cian must assign a unique IP Address to
each unit in accordance with the customer’s
IP scheme. Annexxus web browser applica-
tion is used to change Annexxus default IP
address.
To change Annexxus IP address, do the following:
1. Connect Annexxus-series to the power source in accordance with the connections diagram
2. Connect Annexxus-series and a local PC/laptop to the dedicated router/switch
3. Open Internet Explorer browser window on a local PC/laptop and enter
http://192.0.0.64
in the address line.
4. You will be prompted to install Active X control. Click on the banner and select
Install Active X...
from the context
menu.
5. In the Internet Explorer - Security Warning window, click
Install
.
19
Annexxus Installation/Setup Details
Chapter 1. Introduction
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
