User Manual | 5
1.3 Check List
When opening the carton, please make sure that all the items listed below are present:
1.
VGA cable (male-to-male) ×1
2.
Power cord ×1
3.
USB cable ×1 (for touch monitor models only)
4.
HDMI cable x1
5.
Audio cable 3.5E x1
6.
User guide ×1
7.
Remote control x 1,
8.
Battery x 2
9.
Cleaning fabric x2
10.
Stylus x2
11.
Wall mount installation guide x1
12.
Screw M8*18mm P head with washer x 4
If any items are missing or damaged, please contact your local dealer immediately.
Following items are optional at specific ordering:
13.
VGA cable (male-to-male) (optional) for VGA out application
Adapter/Converter Advisory
If specific adapter/converter is required, i.e. tablet PCs, in order to connect to this
monitor, please use original adapter/converter recommended by the original brand.
The length of cables should not be longer than 2 meters each.
2. Connecting the Monitor
The procedures for setting up your Monitor kit is as followed:
2.1 Power & Signal Connections
Power cord connection:
Connect the power cord to the AC outlet.
Power on:
Switch on the main power of your monitor (switch is located next to the AC outlet)
Input Source VGA (HDMI1/ HDMI2/ OPS(internal HDMI)/ DP) Signal cable connection:
Plug one end of the 15-pin signal cable to the video signal connector at the rear of the
PC/laptop system (or engine box) and the other end to the monitor.
Or plug one end of the HDMI/ DP signal cable to signal source (PC, laptop, IPC, media player of
any kind with proper HDMI or other out port), and the other end to the HDMI connector on the
monitor.
Tighten the connector screws on both ends of the cable to secure good signal connection.
USB cable connection (for touch monitor models):
Plug one end of the USB (B type) cable to the USB (A type) connector at the rear of the (PC, or,
IPC, or, media player), and the other end to the USB connector on monitor.
There are two USB (B type) connecters, one for HDMI1 on side. the other for dynamic source
All manuals and user guides at all-guides.com
