User Manual | 3
IMPORTANT SAFETY INSTRUCTIONS
1.
Please read these instructions carefully before using the product and keep it for later
reference
2.
Follow all warnings and instructions marked in this manual or on the product.
3.
Unplug the power cable from the wall outlet before cleaning. Clean the product with a damp
soft cloth. Do not use liquid or aerosol cleaners as it may cause permanent damage to the
screen.
4.
Caution of use varies from model to model; please observe appropriate operation per
model in use.
5.
Do not place this product on an unstable cart, stand, or surface which may cause damage or
harm to the product or personnel.
6.
Slots and openings on the cabinet, in the back cover or in the bottom, are for ventilation; to
ensure reliable operation and to prevent from overheating; these openings must not be
blocked or covered at all time. The openings should never be placed near or over a radiator
or heat register, or in a built-in installation unless proper ventilation space (min. 2 inches/
5cm of gap) is provided.
7.
This product should be operated from the type of power indicated on the marking label. If
you are not sure of the type of power available, consult your dealer or local service
company.
8.
This product is equipped with a 3-wire grounding type power plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety
feature. If you do not have proper outlet to insert the plug, contact your electrician to
replace your obsolete outlet. Do not break the ground pin and defeat the purpose of the
grounding.
9.
Do not allow anything to rest, or persons to walk, on the power cord.
10.
. If an extension cord is used with this product, make sure that the total ampere rating
plugged into the extension cord does not exceed the maximum ampere rating of the
extension cord.
11.
Never thrust object/tool of any kind through cabinet slots of this product, as they may touch
dangerous voltage point or short out parts that could result in risk of fire or electric shock.
Never spill liquid of any kind on the product.
12.
Do not attempt to service this product yourself; always refer to qualified or authorized
personnel for servicing this product.
13.
Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
a.
When the power cord or plug is damaged or frayed or broken.
b.
In case that liquid has been spilled into the product
In case the product does not operate normally when the operating instructions are followed,
adjust only those controls that are delineated by the operating instructions.
14.
Caution: When fixed patterns are displayed for a long time, remnant image (retention) is
likely to occur.
All manuals and user guides at all-guides.com
