67
Enable:
Check “ Handle
”
icon to enable the alarm input function.
Alarm input:
This IP camera support 2 alarm input ports. Select the alarm input port.
Alarm in name:
You can define the alarm input name or location.
Trigger:
Setup the alarm input mode (Normal Close / Normal Open) of trigger single.
Arming Schedule:
Arm schedule of enable alarm input detection. Check/Uncheck from Monday
to Sunday, each date can has its own trigger period.
Email:
Check “Email
”
and once the event triggers that it will send Email to setting email address.
Alarm Output:
Check “Alarm output
”
and once the event triggers
, the camera will
linkage to alarm
output.
PTZ:
Check “PTZ
”
and once the event triggers, the camera will
linkage PTZ camera to move the
assign Preset point.
Preset:
Setup the Preset point for the PTZ camera move to when the event is triggered.
Save:
Click “
Save”
icon to store the setting.
Alarm Output:
Click this button to setup the alarm output parameters when the event is triggered.
Output Replay Status:
Setup the alarm output mode (Normal Close / Normal Open).
Output Delay:
Entry the value alarm output trigger period. The alarm output will keep on sending
the signal of each trigger.
Save:
Click “
Save”
icon to store the setting.
Содержание ANYCAM DM-2MIPR04 Series
Страница 18: ...18...
