52
Detect Area:
To add new Detection Area (Max. 4 regions) and each line can setup individual
corresponding parameters. Click “
Drawing
“
icon, then press and drag the left Mouse button to
setup the detection lines from Detect area.
Clear:
Click Clear to delete all detection regions.
Sensitivity:
Setup the senility
of object detection, the high
value increases the sensitivity.
Object Percent:
Setup the minimum percentage ration (target size/ image area) of effective
counting targets. Once the targets ration is smaller than the setting value, the system will ignore
the
target which passing through the trigger line.
Snapshot:
Check “Snapshot
”
and then select the value of snap interval and Number once the event
triggers that the camera will snapshot and save into the SD card or HDD.
Record:
Check “Record
”
once the event triggers once the event triggers that the camera will
snapshot and save into the SD card or HDD.
Alarm Output:
Check “Alarm output
”
and once the event triggers
, the camera will
linkage to alarm
output.
PTZ:
Check “PTZ
”
and once the event triggers, the
camera will linkage PTZ camera to move the
assign Preset point.
Preset:
Setup the Preset point for the PTZ camera move to when the event is triggered.
Save:
Click “
Save”
icon to store the setting.
Содержание ANYCAM DM-2MIPR04 Series
Страница 18: ...18...
