I-Tech CMS-6R4 Скачать руководство пользователя страница 109

Страница: 109 / 123

10-11

Command Reference Guide

/ON

Switch Plug(s) ON

Switches selected outlet(s) On, as described in Section 6.2.2. When a several

plugs are switched On by this command, Boot/Sequence Delay Period will be

applied as described in Section 5.5.5.1.

Note:

When this command is executed by a Non-Supervisor, it will

only be applied to the plugs that are allowed by the password entered

at login.

Availability:

Supervisor / Non-Supervisor

Format:

/ON[,Y] <n>

[Enter]

Where:

(Optional) Suppresses the Command Conﬁrmation Prompt.

The number or name of the plugs that you intend to switch On.

To apply the command to several plugs, enter a space character

or plus sign (+) between each plug number. To apply the

command to a range of plugs, enter the numbers for the ﬁrst

and last plugs in the range, separated by a colon character (:).

To apply the command to all plugs allowed by your password,

enter an asterisk character (*).

Response:

Verbose:

The CMS-6R4 will list the plugs that will be switched On, and

then display the "Sure? (y/n)" prompt, if Y is entered in response to the

prompt, the unit will indicate that the command is in process, and then

display the main status screen when complete.

Terse:

5, if Y, the unit will respond with J.

Example:

Assuming that your password allows access to Plug 2 and Plug 3,

to switch Plugs 2 and 3 On, invoke following command:

/ON,Y 2+3

[Enter]

Set RS232 Port Parameters

Displays a menu that is used to select options and parameters for the RS232

Serial Ports. Note that all functions provided by the /P command are also

available via the Web Browser Interface in the "Serial Parameters" menu.

Section 5.5.3 describes the procedure for deﬁning port parameters.

Availability:

Supervisor Only

Format:

/P [x]

[Enter]

Where

is the number or name of the port to be conﬁgured.

Response:

The Port Parameters Menu is displayed.

Содержание CMS-6R4




























































































































Результаты поиска

Содержание CMS-6R4

Отзывы:

Похожие инструкции для CMS-6R4

Бренды по названию

Популярные бренды

I-Tech CMS-6R4, Руководство пользователя

Результаты поиска

Содержание CMS-6R4

Отзывы:

Похожие инструкции для CMS-6R4

Бренды по названию

Популярные бренды