I-Tech CMS-6R4 Скачать руководство пользователя страница 105

Страница: 105 / 123

10-7

Command Reference Guide

/DPL

Set Plugs to Default State

Sets all four switched outlets to their user-deﬁned default state. For

information on setting outlet defaults, please refer to Section 5.5.5.

Availability:

Supervisor Only

Format:

/DPL[,Y]

[Enter]

Where ,Y is an optional command argument, which can be included to

suppress the command conﬁrmation prompt.

Response:

Verbose:

Lists plugs to be defaulted, and then displays the command

conﬁrmation prompt. If "Y" is entered in response to the prompt, the

CMS-6R4 will display the "Processing - Please Wait" message and then

display the status screen when the default operation is complete.

Terse:

5, if Y, unit will respond with H.

Erase Buffer

Erases data from the buffer for a speciﬁed port(s). Note that erased data cannot

be recovered.

Availability:

Supervisor Only

Format:

/E[,Y] <x> [x]

[Enter]

Where:

(Optional) Suppresses the "SURE? (Y/N)" (command

conﬁrmation) prompt.

Is the number or name of the port buffer(s) to be cleared. To

apply the command to several ports, enter a space character or

a plus sign (+) between each port number. To apply the

command to a range of ports, enter the numbers for the ﬁrst

and last ports in the range, separated by a colon character (:).

To apply the command to all ports allowed by your password,

enter an asterisk character (*).

Response:

Verbose:

The unit will display the command conﬁrmation prompt. If Y is

entered in response to the prompt, the unit will erase the speciﬁed buffer

and then respond with "OK".

Terse:

5, if Y, the unit will respond with 0.

Example:

To clear the buffer for Port 3, access the Command Mode from

a port and account that permit Supervisor commands, and type

/E 3

[Enter]

Содержание CMS-6R4




























































































































Результаты поиска

Содержание CMS-6R4

Отзывы:

Похожие инструкции для CMS-6R4

Бренды по названию

Популярные бренды

I-Tech CMS-6R4, Руководство пользователя

Результаты поиска

Содержание CMS-6R4

Отзывы:

Похожие инструкции для CMS-6R4

Бренды по названию

Популярные бренды