10
Figure 8.
IP Module
The IP Module comes with a serial port for connecting to any serial device, such as a serial PDU
(Power Distribution Unit) to provide remote power control.
2.5
Power Up Sequence
The recommended Power Up sequence is as follows:
1. Monitor
2. KVM Switch
3. Connected Computers
Verify that all connected computers to the KVM Switch are powered on. If any connected
computers have not been powered on, it is okay to do so at this time (computers can be powered
on simultaneously). The KVM Switch emulates both a mouse and keyboard on each port and
allows your computer to boot normally.
After the KVM switch is powered on, you will see the SELECT LED of Port 1 will be lit and you will
hear a beep sound. If you encounter an error, check your cable connections for that computer and
reboot.
8 / 16 Port KVM Switch
