background image

13 

3. Operation

There are three methods you can use to control the KVM switch: 
1.

Push buttons located on the front panel of the KVM Switch

2.

Through the On-Screen Display (OSD) Menu

3.

Using Hotkey commands through the console keyboard

It takes approximately 1-2 seconds for the video signal to refresh after switching computers. Re-

synchronization of the mouse and keyboard signals also occurs. This is normal operation and 

ensures proper synchronization is established between the console and connected computers.

 

3.1

 

DDC function 

The KVM Switch supports DDC (Display Data Channel). DDC is a VESA standard for communication 
between a monitor and a host video adapter. Using DDC, a monitor can inform the video card 

about its properties, such as maximum resolution and color depth. The video card can then use 

this information to ensure it outputs the correct display configuration. 

Please Note

: The DDC function of the KVM Switch will dynamically detect and copy the DDC 

information from the monitor that is connected to the LOCAL console VGA port. This DDC 

information will be sent to each connected computer during the computer startup. 

3.2

 

Push Button Port Selection 

To select a computer, simply push the corresponding button on the front of the KVM switch. 

3.3

 

Hotkey Function 

You can conveniently control the KVM switch through simple keyboard Hotkey sequences. To send 

keyboard Hotkey commands to the KVM switch, you must press the Hotkey within 2 seconds. You 

will hear a beep sound confirming you are entering the Hotkey mode. If you do not press any key 

during Hotkey mode within 2 seconds, the Hotkey mode will be disabled and return the keyboard 

back to its normal state. 

The default Hotkey is 

Caps Lock + Caps Lock

 but you can change the Hotkey to an alternate Hotkey 

if Caps Lock clashes with any existing applications. To change the Hotkey, use the OSD menu. 

8 / 16 Port KVM Switch

Содержание AVS1601























Отзывы: