i-team i-gum, Руководство пользователя, Страница: 8 / 47

8
The solution can cause floors to become slippery; it is advised to mark the floor of the job site to
warn people. (Please note: the wet floor sign is not part of the i-gum
®
system delivery).
In order to use the i-gum
®
on hard (outdoor) as well as soft (indoor) surfaces, both steel and nylon
brushes are provided. These brushes are easy to replace. Select the right brush for each job, see
Table 1 below.
Steel brush Nylon brush
Concrete, tarmac, asphalt, hard brick paving,
natural stone. Sandstone, soft brick paving, wood, carpets.
Table 1
The gum remover solution will not leave marks; however, it is known in some isolated cases the
heated steam will affect the varnish of wooden floors and can create a dull spot. When not sure
about the surface: always use the nylon brush and try-out the i-gum
®
in a discrete place.
1.2 Non-intended use of the product
WARNING
Non-intended use can have consequences for the safety of operators and bystanders
and will void the warranty on the product.
The i-gum
®
is not intended to remove anything else than chewing gum patches on floors. It is only
effective using the specialized water based i-gum
®
gum remover solution. Filling the tank with clear
water will not remove gum patches and therefore is pointless.
The steam lance may not be raised higher than horizontal during operation as the hot gum remover
solution cleaning fluid can cause burns (see Figure 1).
DO NOT fill the i-gum
®
with any other detergent. Alternative products will void the manufacturer’s
warranty, more importantly they may also cause serious harm to the operator. For instance, as the
fluid is heated to steam any alcohol-based detergent can catch fire, other products might cause toxic
fumes.
ONLY use the specialized water based i-gum
®
gum remover solution or other solutions
provided by the manufacturer.
1.3 Lifespan
CAUTION
To ensure proper and safe operation throughout the life of the i-gum
®
, the i-gum
®
must
be checked every 1,000 hours minutes by an authorized i-team partner.
The main control panel on the side contains a counter that indicates the number of minutes the
machine is used.
1.4 Modifications
It is not permitted to make modifications to the design of the i-gum
®
without consultation and
permission from the manufacturer. This affects the warranty, see 1.6.