36
www.i-sens.com
www.i-sens.com
37
Step 1
Without inserting a test strip, press and
the
S
button simultaneously for 3 seconds
to enter the time alarm mode. The ‘alarm1’
will be displayed while the ‘OFF’ character
blinks on the screen.
Step 2
On pressing , the ‘alarm1’ is set and the
‘On’ character is displayed on the screen.
Press again to cancel the ‘alarm1’. The
‘OFF’ icon will blink on the screen.
Step 3
Press to adjust the time of the ‘alarm1’.
A number representing the time will blink
on the screen. Press to set the time.
Press to end.
Setting the Time Alarms (alarm1 ~ 3)
Step 4
On pressing , the number indicating the
minute will start blinking. Press to set the
accurate minute.
Step 5
Press the
S
button to finish and to enter the
‘alarm 2’ mode.
Repeat steps 2 to 5 to set the remaining
time alarms (alarm 2 ~ 3).
Step 6
Press the
S
button for 3 seconds to finish
and turn the meter off.
