34
www.i-sens.com
www.i-sens.com
35
Step 3
Use the button to scroll through the test results, starting
from the most recent and ending with the oldest. Press to
return to the result seen previously.
After checking the stored test result, press the
S
button to turn
off the meter.
Note:
On pressing , the latest test result saved in the meter’s
memory will be displayed on the screen along with the date
and time. Press and hold to scroll through the test results.
Step
1
Setting the PP2 alarm On
Without inserting a test strip,
press and hold for 3 seconds to
set the post-meal alarm. The ‘PP2’
character, the bell ( ) icon and
then the ‘On’ character will be
displayed. The screen will then
automatically change to the
memory check mode. At this
time, the bell ( ) icon, indicating
that the PP2 alarm has been set, will
be displayed on the screen.
Step 2
Setting the PP2 alarm OFF
To turn off the PP2 alarm, press
and hold for 3 seconds. The
‘PP2’ character, the bell ( ) icon
and then the ‘OFF’ character will
appear on the screen. Then the
screen will change automatically
to the memory check mode
without the bell ( ) icon being
displayed.
Setting the post-meal alarm (PP2 alarm)
Four types of alarms can be set in the CareSens N meter: one post-
meal alarm (PP2 alarm) and three time set alarms (alarm1 ~ 3).
The PP2 alarm goes off 2 hours after setting the alarm.
The alarms ring for 15 seconds and can be silenced by pressing ,
or the
S
button or by inserting a test strip.
icon vanishes
Setting the Alarm Function
