i-PRO WJ-NU301K Series Скачать руководство пользователя страница 23

23

Symptom

Cause/solution

Ref. pages

The "Thermal error" indication 
is displayed on the main 
monitor.

•  The ambient operating temperature is 0 °C to +45 °C. The 

"Thermal error" is displayed based on the internal thermal 
information of the HDD. If the "Thermal error" indication is 
displayed, it is recommended to change the installation 
environment so that the ambient temperature is maintained at 
approx. +25 °C. When the "Thermal error" indication is displayed 
frequently, contact your dealer.

14

•  Check if the fan is malfunctioning.

Operating 

Instructions

•  Check if the recorder ventilation holes or cooling fan are blocked, 

and also check for dust collected around the ventilation holes.

6

The clock of the recorder may 
keep bad time.

•  The clock function of the recorder is accurate within ±30 seconds 

per month.  
To keep the correct recording, set the time periodically, or 
configure the system using the NTP function so as to keep the 
correct current time.

[HDD] indicator lights red.

•  The hard disk drive is faulty. Contact your dealer.

The error indicator blinks red.

•  A system error occurred. Contact your dealer.

"Authentication error" of the 
camera is displayed.

•  When a new camera is detected by Easy Start, the username and 

password of the registered camera will be cleared, and an 
"Authentication error" will be displayed. In this case, open the 
"Change Registration Information" screen on the [Camera 
Registration] tab of [Basic Settings] - [Camera], and re-enter the 
username and password manually.

Operating 

Instructions

•  Initialize the camera and retry the camera registration upon referring 

to the operating instructions of the camera.

Mouse cursor does not 
appear.

•  Is the cable properly connected?  

Some mouse may not be recognized. Use the mouse that comes 
with this product.

Inspect the power cord, power plug and connectors periodically.

Symptom

Cause/solution

Ref. pages

The power cord insulation is damaged.

•  The power cord, connector, or power plug is damaged.

 

This may result in electric shock or a fire.

 

Unplug the power plug from the AC outlet immediately, and 
refer to qualified service personnel.

The power cord, plug and 
connectors get hot during use.
The power cord gets hot when bent 
or stretched.

Troubleshooting

 (continued)

Содержание WJ-NU301K Series

























Отзывы: