ISH INLINE CONNECTOR Instruction Manual
Document No.
HDM-0006
8
/
22
Confidential C
(2) Bottom burrs
Burrs produced during crimping process must not extend beyond the bottom surface. (see Fig.9)
(3) Bellmouth,excess conductors and cut-off tab
Bellmouth,excess conductors and cut-off tab must satisfy the dimensions shown in Fig. 10 and Table 2.
Fig.10. Bellmouth, excess conductors and cut-off tab
No extension
Extension
Bottom surface of terminal
Bottom burrs
【Good】
【No good】
Fig 9. Bottom burrs
