ISH INLINE CONNECTOR Instruction Manual
Document No.
HDM-0006
5
/
22
Confidential C
3-3.Terminal part names
3-4. Crimping requirements
(1) Crimp dimension
Crimped female terminals must satisfy the crimp dimension specified in Table 1.
※
Crimp dimensions may be different depending on conductor construction of the wire.
Please contact our Sales Department shown in 14(sheet 22) about wire used, then we will verify it and
notify you the appropriate crimp dimensions.
Fig 3. Terminal part names
Table 1. Crimp dimension
Insulation barrel Crimp Height
0.95±0.05 (
※
)
Part No.
Wire Size
Insulation
Outer Diameter
Wire barrel Crimp Height
Wire barrel Crimp Width
1.8±0.05
Insulation barrel Crimp Width
VT002-012
0.3mm
2
Φ1.60mm MAX.
0.9±0.05 (
※
)
1.4±0.04
1.6+0.1/-0.05
1.55±0.05
0.5mm
2