I-PEX ISH 26P Скачать руководство пользователя страница 29

Страница: 29 / 29

ISH & ISHV & ISHVS CONNECTOR Instruction Manual

Document No.

HDM-0002

Confidential C

14. Other notes

①

Handle products with care. Do not place excessive force/impact to connectors main bodies or wires.

②

Store products in a dry place without any dust or dirt.

Avoid storage for an extended period or any way that may cause damage or deformation to connectors.

③

While transporting of products should ensure that no excessive force must be applied to the

connectors and wires, and that no rain water, dust and dirt, etc. are present.

④

Handle products with care. If there is any damage, deformation, discoloration, etc. to wires, housings, and any other parts, do not use the

damaged item. Replace the item with a new one.

⑤

Do not touch the contact part of the connector with fingers or with any object.

⑥

Do not apply excessive current. Doing so may cause fire and melting damage.

⑦

Do not disassemble products.

⑧

Do not insert any terminals into housing other than those specified.

⑨

Follow this Manual for using the products. Do not use in any way other than instructed.

15. Contact
      Tokyo office Sales Dept.
      I-PEX Inc.
      TEL: 03-5479-7410    FAX: 03-5479-7411

Содержание ISH 26P






























Результаты поиска

Содержание ISH 26P

Отзывы:

Похожие инструкции для ISH 26P

Бренды по названию

Популярные бренды

I-PEX ISH 26P, Инструкция по эксплуатации

Результаты поиска

Содержание ISH 26P

Отзывы:

Похожие инструкции для ISH 26P

Бренды по названию

Популярные бренды